Mk7 for industrial metal gates and doors right side anti lift plate for fitting under a left hooked post or left hinged door
About this product
Mark 7 "right side anti lift version" suitable for left hinged gates with 19 mm adjustable hook and band hinges, internal or external opening with gate flush with post, one way opening and gate vertical support beam at least 141 mm wide.
Mark 7 "right side anti lift version" suitable for left hinged external door as a protective shield for padlocks hasp and staple.
Dimensions
Length cover plate 195 mm + 80 mm anti lift plate x width 141 mm x external depth 105 mm x internal dimension 75 mm x cover plate thickness 5 mm x anti lift plate thickness 10 mm "all dimensions +/- 5%"
Patent Pending
Key features
Restricts 125 mm cordless angle grinder attack.
Restricts bolt cropper attack.
Restrict sledgehammer attack.
Prevents gate being lifted off the hinges.
Cover plate for padlocks to restrict shackle attack.
Cover plate for hasp staple to restrict hacksaw attack.
Cover plate for 19 mm adjustable band to restrict tampering.
Cover plate for hook to prevent removal of gate.
Highly visible orange powder coated finish.
Zinc plated steel construction for long continuous use.
Padlock cover shield for single gates.
Padlock cover shield for external doors.
Cover plate for sliding doors
Fitting product for use as a padlock hasp and staple cover plate
Position cover plate central between hasp and staple on the door or gate with front flange edge flush with edge of door or gate.
Mark the positions of the 4 x 10 mm squared holes from the left and right flanges of the cover plate onto the door or gate.
Drill 4 x 10 mm holes and insert 4 x M10 coach bolts through the 4 x 10 mm squared holes on cover plate.
Inside the room secure with 4 x M10 nuts.
Fitting product for use as a adjustable hook & band cover plate
Position cover plate central between the adjustable band.
Slide cover plate so that anti lift plate reaches the furthest point of the main support block which supports the hook to the flat mounting plate.
If possible leave a 10-20 mm gap between the bottom of the hook and top of anti lift plate.
Mark the positions of the 4 x 10 mm squared holes from the left and right flanges of the cover plate onto the gate or door.
Drill 4 x 10 mm holes and push through 4 x M10 coach bolts through the cover plates 4 x 10 mm squared holes.
Secure with 4 x M10 anti tamper shear off nuts on the other side of the gate or 4 x M10 nuts on door installations.
versions
Related Products